Hardwood floor service
Sanding & Refinishing
Transform worn, scratched, or faded hardwood floors back to their original beauty.
Sanding & Refinishing
Transform worn, scratched, or faded hardwood floors back to their original beauty. Our multi-step sanding process removes years of wear while our custom finishing brings out the natural character of the wood. We use state-of-the-art dust-containment systems to minimize mess and ensure a clean work environment.
Get a Free QuoteOverview
Hardwood floor refinishing is one of the most cost-effective ways to restore the beauty and value of your floors. Over time, even the best-maintained hardwood floors show signs of wear: scratches from furniture, pet claws, and daily foot traffic; fading from sunlight exposure; and general dullness from years of use. Our comprehensive refinishing process removes the old finish, sands away surface damage, and applies a fresh protective coating that will make your floors look brand new.
What We Offer
- Dust-containment systems for cleaner work environment
- Multiple finish options: matte, satin, semi-gloss, and high-gloss
- Water-based and oil-based polyurethane finishes available
- Complete edge and corner detail work
- Multi-step sanding process for optimal results
- Custom finishing to enhance natural wood character
Benefits
- Restores your floors to like-new condition without the cost of replacement
- Increases your home's value and curb appeal
- Removes deep scratches, stains, and surface damage
- Allows you to change the color or finish of your existing floors
- Extends the life of your hardwood floors significantly
- Improves indoor air quality by removing old, potentially contaminated finishes
When to Use This Service
- 1.Your floors have visible scratches, scuffs, or wear patterns
- 2.The finish is worn thin or completely gone in high-traffic areas
- 3.You want to change the color or finish of your existing floors
- 4.Your floors look dull and lackluster despite regular cleaning
- 5.You're preparing to sell your home and want to maximize value
- 6.It's been 7-10 years since your last refinishing (typical lifespan)
Technical Details
- •We use professional-grade drum sanders, edgers, and orbital sanders for consistent results
- •Multi-grit sanding process: typically starting with 36-40 grit for heavy removal, progressing through 60, 80, and 100 grit for smooth finish
- •Dust containment systems capture 99% of sanding dust, keeping your home clean
- •We offer both water-based and oil-based polyurethane finishes, each with distinct advantages
- •Water-based finishes dry faster (2-4 hours), have lower VOCs, and maintain color better
- •Oil-based finishes provide a richer amber tone, are more durable, but take longer to cure (24-48 hours)
- •Typical project timeline: 3-5 days depending on square footage and finish type
- •We can match any existing stain color or create custom colors on-site
Our Detailed Process
Initial Assessment & Preparation
We inspect your floors for damage, check moisture levels, and discuss your goals. We move furniture, remove baseboards if needed, and protect adjacent areas. We also check for any structural issues that need addressing before sanding.
Coarse Sanding
Using a drum sander with coarse grit (36-40), we remove the old finish and level any uneven areas. This aggressive sanding removes years of wear, scratches, and surface damage. We pay special attention to high-traffic areas and doorways.
Medium & Fine Sanding
We progress through medium (60-80 grit) and fine (100-120 grit) sanding passes to create a smooth, uniform surface. Each pass removes the scratches from the previous grit, resulting in a perfectly smooth foundation for the new finish.
Edge & Corner Work
Using specialized edgers and hand sanders, we carefully sand all edges, corners, and areas the drum sander can't reach. This ensures a consistent finish throughout the entire floor, with no visible transitions between areas.
Staining (Optional)
If you're changing the color, we apply your chosen stain evenly across the floor. We can match existing colors or create custom blends. We provide sample boards beforehand so you can approve the exact shade before application.
Finish Application
We apply multiple coats of your chosen finish (typically 2-3 coats), sanding lightly between coats for optimal adhesion. Each coat is applied with precision to avoid bubbles, streaks, or brush marks. We ensure proper drying time between coats.
Final Inspection & Curing
After the final coat, we inspect the entire floor for any imperfections. We provide detailed care instructions and let you know when the floor is fully cured and ready for normal use (typically 24-72 hours depending on finish type).
Frequently Asked Questions
Start your project
Get a quote for sanding & refinishing.
Share a few details about your floors and service area. Ashton will follow up with the next step.